New!!!

FMA Cellpro 10s

 

FMA Cellpro 10s Charger

Qty: Combo: Charger (No Adapters) $148.99 Combo 1(With TP/PQ ADAPTERS $158.99 Combo 2 (with JST/GP Adapter) $158.99

Features:

• Up to 10A Max Charge Current
• Continuous Power 312W input 250W output at 15V
• Displays Individual Cell Internal Resistance to 0.1 mohm Resolution (Battery Quality Indicator, a feature exclusive to the Cellpro 10s charger)
• Charges Lithium Polymer, Lithium Ion, or A123 Cells (variable charge rates for both LiPo and A123 cells). Charges 1 Pack of 1s-10s or 2 Packs of 1s-5s Simultaneously
• Backlit Liquid Crystal Display
• FMA's Cellpro Node Connector is a key part of the system. It enables the charger to monitor individual cells and independently charge each cell to its optimum level.
• Faster Auto Charge rates (1.0C, 2.0C, and 3.0C), permit safe charging Lipo batteries at up to a 3C charge rate.
• Unprecedented Accuracy
• Fuel Gauge Readout
• Unparalleled Safety
• Self Diagnostics
• Storage Charge Mode
• Safety Charge Mode
• Support for long battery extensions
• Cold Weather Mode
  

For Battery types:

• Lithium Polymer (1s to 10s balanced)
• Lithium Ion (1s to 10s balanced)
• Lithium Manganese (1s to 10s balanced)
• A123 (LiFePO4) (1s to 10s balanced)

Pack capacity:

100 mAh to 65Ah (charge time limited to max 12 hours)

Input voltage:

10-16VDC, reverse polarity protected

Input current:

1A to 25A, software limited, user adjustable using PC software

Power conversion:

DC/DC converter, 62.5 kHz, 80% to 90% efficiency depending on output current

Nominal Output Voltage:

3.60, 4.10, and 4.20 volts per cell; 42V maximum

Output battery charge current:

Adjustable range 100mA to 10A, or 100mA to 4A (node only charging), limited by 25A input current*

Continuous max output power:

180W @ +12VDC input, 260W @ +15.7VDC input

Voltage calibration:

Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV

Current calibration:

Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA

Measurement accuracy:

• Voltage resolution: 0.1mV
• Voltage tolerance: +/- 6mV
• Charge current: +/- 1%
• Capacity added to pack: +/- 1%
• Percent capacity ("Fuel"): +/- 20%

Serial data output:

19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity

Data integrity:

Checksum, CRC checking

Cooling fans:

Single, 8 CFM, 40mm diameter

Heat sink:

aluminum case, finned

Output battery connector:

"Cellpro" compatible, 2 x JST PA series, 6 position

LCD:

2 line, 16 character, light grey/blue backlit