New!!!

FMA Cellpro 4s Gold

 

FMA Cellpro 4s Gold Charger

Qty: Combo: Charger (No Adapters) $68.99 Combo 1(Charger with 12v 5a Power Supply)$84.99 Combo 2 (with TP/PQ Adapter) $71.99 Combo 3 (With JST/GP Adapter) $71.99

Features:

Computer Controlled Integrated Full Power Balancing for Fast Charging

Unprecedented Accuracy

Liquid Crystal Display

Fuel Gauge Readout

Simple, Easy-to-Use One Button User Interface

Support for A123 Chemistry Included

PC Interface Ready

Unparalleled Safety

Self Diagnostics

Storage Charge Mode

Safety Charge Mode

Support for Long Battery Extensions

Cold Weather Mode

Free Firmware Updates Via the Internet and PC Software

 

For Battery types:

• Lithium Polymer
• Lithium Ion
• Lithium Manganese (1s to 4s balanced)
• A123 (LiFePO4) (1s to 4s balanced)

Pack capacity:

250 mAh to 20Ah (charge time limited to max 8 hours)

Input voltage:

10-16VDC, reverse polarity protected

Input current:

Up to 6A @ 10VDC input, up to 4.5A @ 13.6VDC input

Power conversion:

DC/DC converter, 62.5 kHz, 90% efficiency

Nominal Output Voltage:

3.60, 4.20 volts per cell; 16.8V maximum

Output battery charge current:

Adjustable range 250mA to 4A, limited by 5A input current*

Continuous max output power:

58W @ +12VDC input

Voltage calibration:

Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 10 mV

Current calibration:

Charge current is factory calibrated on a 4A standard; calibration is to +/- 6mA

Measurement accuracy:

• Voltage resolution: 0.1mV
• Voltage tolerance: +/- 10mV
• Charge current: +/- 1%
• Capacity added to pack: +/- 1%
• Percent capacity ("Fuel"): +/- 20%

Serial data output:

19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity

Data integrity:

Checksum, CRC checking

Output battery connector:

"Cellpro" compatible, JST PA series, 5 position

LCD:

2 line, 16 character, non-backlit