New!!!

Cellpro Multi 4

 

FMA Cellpro Multi 4 Charger Qty:

Combo: Charger (No Adapters) $72.99 Combo 1 (Thunder Power / Molex Adapter) $76.99 Combo 2 (JST / GP Adapter) $76.99 Combo 3 (with 12v 5a Power Supply) $88.99

 

Features:

1. Backlit Liquid Crystal Display

2. High Impact ABS Plastic protective enclosure

3. Multi-Chemistry, supports LiPoly, LiIon, LiFePO4, A123, LiMn, NiCd, NiMH, Pb

4. Supports 2-way P.C. Interface (FUIM2)

5. Enhanced Internet Upgradable (IU) Charge Control Software (free download)

6. IU Firmware support (free for the life of the product)

7. 25 User-Programmable Presets

8. Also includes 50 library presets built into the charger and virtually unlimited potential for presets within the CCS.

9. Presets may be edited at the charger, -or-

10. Advanced editing of presets may be accomplished using the Charge Control Software

11. 200 mA discharging and/or cycling available for all chemistries FEATURE REMOVED

...and then some

1. Edit, save, and recall presets one at a time to your PC using the CCS

2. Backup all 25 user programmable presets in the charger to your PC

3. Share custom presets with your friends

4. Edit, save, and recall custom fuel tables to improve the accuracy of AUTO charge modes. Custom fuel tables may be generated from 1C manual charge graphs of Li batteries, included with software upgrades over time, and/or shared with friends over the internet.

5. Alter the individual charger displays to meet your needs. Change the order of any screen or hide screens from displaying. Set each preset to present the information you want the way you want it using the CCS.

6. Open Architecture Presets provide access to over 70 different preset parameters. You don't have to be an expert to create the perfect charger for yourself. The CCS will ensure that any charger parameters you wish to alter do not violate safety protocols. This feature is for advanced users only, but if you are the type of person who wants to tweak settings to meet your exact requirements, this is the ultimate tool for you.

7. Support for non-balanced charge of A123 packs (up to full output voltage of the charger)

8. Support for non-balanced charge of 2s LiPo for small park flyer batteries.

9. Charge optimizations programmable by preset - select between various options such as "Optimize for faster charging", "Optimize for accurate balancing", "Optimize for small LiPo's", and more to come.

 

For Battery types:

• Lithium Polymer/Lithium Ion/Lithium Manganese (1s to 4s balanced and 2s unbalanced)
• A123 (LiFePO4) (1s to 4s balanced and 1s to 5s unbalanced)
• NiCd/NiMH (1s to 12s unbalanced)
• Pb (6v and 12v)
  

Pack capacity:

5 mAh to 32Ah (charge time limited to max 8 hours)

Input voltage:

10-16VDC, reverse polarity protected

Input current:

1A to 5A, software limited, user adjustable using PC software

Power conversion:

DC/DC converter, 125 kHz, 90% efficiency

Nominal Output Voltage:

1.58, 3.65, 4.10, and 4.20 volts per cell (user adjustable using CCS); 19V maximum

Output battery charge current:

Adjustable range 5mA to 4A, limited by 5A input current*

Continuous max output power:

58W @ +12VDC input

Voltage calibration:

Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV

Current calibration:

Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA

Measurement accuracy:

• Voltage resolution: 0.1mV
• Voltage tolerance: +/- 6mV
• Charge current: +/- 1%
• Capacity added to pack: +/- 1%
• Percent capacity ("Fuel"): +/- 20%

Serial data output:

19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity

Data integrity:

Checksum, CRC checking

Output battery connector:

"Cellpro" compatible, JST PA series, 5 position

LCD:

2 line, 16 character, light grey/blue backlit